ASUS VC133 사용자 설명서
ASUS CUPLE-VM User’s Manual
49
4. BIOS SETUP
4. BIOS SETUP
4.4 Advanced Menu
Advanced
Menu
System/PCI Frequency [MHz]
This field displays the frequency ratio between the System (Front Side Bus)
and the PCI bus. The ratios displayed in this field are auto detected by the
system.
and the PCI bus. The ratios displayed in this field are auto detected by the
system.
System/DRAM Frequency Ratio [Auto]
This field offers 3 settings for the frequency ratio between the System (Front
Side Bus) and SDRAM. If the FSB Frequency is 66MHz, then the field
offers three configuration options: [Auto] [1/1] [2/3]. If the FSB Frequency
is 100MHz, then the field offers three configuration options: [Auto] [3/2]
[3/4]. If the FSB Frequency is 133MHz, then the field offers three configu-
ration options: [Auto] [1/1] [4/3].
Side Bus) and SDRAM. If the FSB Frequency is 66MHz, then the field
offers three configuration options: [Auto] [1/1] [2/3]. If the FSB Frequency
is 100MHz, then the field offers three configuration options: [Auto] [3/2]
[3/4]. If the FSB Frequency is 133MHz, then the field offers three configu-
ration options: [Auto] [1/1] [4/3].
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These field lets you choose from the default of [Enabled] or choose [Dis-
abled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache. Con-
figuration options: [Disabled] [Enabled]
abled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache. Con-
figuration options: [Disabled] [Enabled]
CPU Level 2 Cache ECC Check [Disabled]
This function controls the ECC capability in the CPU level 2 cache. Con-
figuration options: [Disabled] [Enabled]
figuration options: [Disabled] [Enabled]
BIOS Update [Enabled]
This functions as an update loader integrated into the BIOS to supply the
processor with the required data. In the default position of [Enabled], the
BIOS will load the update on all processors during system bootup. Configu-
ration options: [Disabled] [Enabled]
processor with the required data. In the default position of [Enabled], the
BIOS will load the update on all processors during system bootup. Configu-
ration options: [Disabled] [Enabled]