ASUS P6T SE 사용자 설명서

2-22

Chapter 2: Hardware information

3-pin OV_DRAM_BUS, 3-pin OV_QPI_DRAM)
These jumpers allow you to enable or disable the advanced CPU, DRAM Bus, and QPI 

DRAM overvoltage settings in BIOS. Read the following information before you change 

the jumper settings.

• 

Before you change the jumper settings for extra-high overvoltage ability, use the BIOS 

items first to adjust the desired CPU, DRAM, and QPI performance. Make sure your 

system functions well under the highest BIOS voltage settings before you change the 

setting of these three jumpers.

• 

DO NOT set the OV_CPU jumper to pins 2–3 when you install a new CPU and have 

not booted for the first time. Doing so may cause the system to halt. For system failure 

due to the wrong setting of the OV_CPU jumper, shut down the computer and move 

the cap back to pins 1–2.

• 

According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may 

damage the CPU permanently. We recommend you install the DIMMs with the voltage 

requirement below 1.65V.

• 

The system may need a better cooling system (for example, a water-cooling system) 

to work stably under high voltage settings.

Pins 1-2 (Default)

up to 1.70V

up to 1.90V

up to 1.70V

Pins 2-3 (OV Enabled) up to 2.10V

up to 2.46V

up to 1.90V