ASUS Crosshair V Formula- 사용자 설명서

1-36

Chapter 1: Product introduction

These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk 

drives and optical disc drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, 

or RAID 10 configuration through the onboard AMD

®

 SB950 controller.

• 

These connectors are set to [AHCI Mode] by default. If you intend to create a Serial 

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID 

Mode]. Refer to section 3.5.4 SATA Configuration for details.

• 

Before creating a RAID set, refer to section 5.1 RAID configurations or the manual 

bundled in the motherboard support DVD.

• 

When creating a RAID set, set the SATA_5-6 connectors to [AHCI Mode] or [IDE 

Mode] to ensure that the system recognizes your ODD device.

• 

When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 

3.5.4 SATA Configuration for details.

• 

You must install Windows

®

 XP Service Pack 3 or later versions before using Serial 

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using 

Windows

®

 XP SP3 or later versions.