Ampro Corporation 420 사용자 설명서

CoreModule 420

QuickStart Guide 

1

This guide provides the most efficient way to set up your CoreModule

 420 single board computer

(SBC).  The instructions provided in this guide include:

• Removing the CoreModule 420 from the shipping container and inventorying the accessories
• Connecting cables to the CoreModule 420
• Connecting the peripherals, boot devices, and power supply to the CoreModule 420
• Powering up the CoreModule 420

Information not provided in this QuickStart Guide includes:

• CoreModule 420 SBC Specifications
• Environmental requirements
• CoreModule 420 connector/pin numbers and definitions
• Supplied software use and programming considerations

The following peripherals and devices are needed to make full use of the CoreModule 420.

• Peripherals (Customer provided):

♦

Keyboard (PS/2 Adapter provided in QuickStart Kit)

♦

PS/2 Mouse

♦

CRT Monitor

• Power Supply (Customer provided):

♦

AT or  +5V power supply – Typically, an AT power supply is required to provide power to
the CoreModule 420 SBC and its associated peripherals and boot devices.

• Boot Devices (one or more - Customer provided):

♦

Floppy Disk drive (adapter cable provided by Ampro)

♦

CD-ROM

♦

IDE hard disk drive

♦

DiskOnChip

♦

CompactFlash card (may be provided by Ampro)

• Optional Devices/Connections (Customer provided):

♦

TFT Flat Panel and custom cable

♦

Ethernet connection

♦

USB Devices

Refer to the QuickStart Kit Contents Sheet for a list of the items in the shipping container.