Lathem TS100 사용자 설명서

 

 

22

Select a site to place the USB terminal that will be convenient to 
employees clocking in and out. If you wish to increase the distance 
between the USB terminal and the computer’s USB port, you may 
utilize the following USB cable extenders available from the help 
desk at (800) 241-4990 or from 

http://shop.lathem.com

. 

• 16 foot USB Active Extension Cable (P/N: USBCABLE16) 

Connect up to four cables in succession. 

• USB Super Extender (P/N: USBEXTENDER) 

Extend distance up to 150’ using Cat5 cable sold separately. 

Place the TS100 or Remote Finger Sensor on a desk or table within 
close range of the computer where the USB Terminal Manager 
software is installed. The terminals come with a cable that is 
approximately 6 feet long.  

Step 1: Select a site to install your PC50/60 terminal that will be 
convenient to employees clocking in and out. The included USB 
cable is 15 feet long. 

The PC50/PC60 terminal derives its power from the USB Port of its 
host computer. No other power source is required for basic 
operation. The optional Wall Mount Finger Sensor requires the 
addition of an AC Power Adapter. Is using the Wall Mount Finger 
Sensor keep in mind that the terminal will have to be mounted in 
close proximity to an AC outlet.