Toshiba MA-1650-4 사용자 설명서
10. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11110
10-23
|Tare Weight| [TARE 3]
|Tare 2 Rate| [TARE 2]
to be continued to the arrows
marked with “(M)” in the above
three operation sequences of the
Auto Scale Entry.
marked with “(M)” in the above
three operation sequences of the
Auto Scale Entry.
NOTES:
1. If the Tare 2 rate is programmed in the PLU table, a PLU entry using |Tare 2 Rate| [TARE 2]
(third pattern above) cannot be performed.
2. The [TARE 3] key cannot be used together with the [TARE] key.
3. Omission of the Tare 3 Entry causes an error if the compulsory status of the Tare 3 Entry has
3. Omission of the Tare 3 Entry causes an error if the compulsory status of the Tare 3 Entry has
been programmed to a department/PLU item to be entered.
(3)
Manual Scale Entry (It may be prohibited by a program option.)
|Net Weight| of the item
[SCALE]
to be continued to the arrows marked with “(M)”
in the above three operation sequences of the
Auto Scale Entry.
in the above three operation sequences of the
Auto Scale Entry.
(4)
Return or Void Manual Scale Entry (It may be prohibited by a program option.)
[RTN MDSE] for Return
to be continued to the top of the “Manual Scale Entry” sequence above.
[VOID] for Void
10.32 LISTING CAPACITY OPEN
0 to 99.99 (%)
Any value other than 0,
however, less than the
weight of scaled item
however, less than the
weight of scaled item
1 to 99999
(unit: g or 1/100LB. For example, enter 5 for 0.05 LB.)
(unit: g or 1/100LB. For example, enter 5 for 0.05 LB.)
For Departments and PLUs
Depress [LC OPEN] (or [OPEN]) prior to or any time during an entry of an open-department, open-PLU, or
preset-open department or PLU sequence (including REPEAT and QUANTITY EXTENSION entries). Please
note that the [LC OPEN] or [OPEN] key must be pressed, at latest, before the final key of the entry sequence.
The High Amount Limit for the department or PLU will be extended with two higher digits, and the Low Amount
Limit will be extended with one lower digit. For entering an amount still exceeding these limits, you must call for a
Manager Intervention.
Depress [LC OPEN] (or [OPEN]) prior to or any time during an entry of an open-department, open-PLU, or
preset-open department or PLU sequence (including REPEAT and QUANTITY EXTENSION entries). Please
note that the [LC OPEN] or [OPEN] key must be pressed, at latest, before the final key of the entry sequence.
The High Amount Limit for the department or PLU will be extended with two higher digits, and the Low Amount
Limit will be extended with one lower digit. For entering an amount still exceeding these limits, you must call for a
Manager Intervention.
For Media Tender Amounts
Depress [LC OPEN] (or [OPEN]) before or after the amount but Media Key. The High Amount Limit for the media
tendering will be extended with one higher digit. In need of still exceeding this limit, you must call for a Manager
Intervention.
Depress [LC OPEN] (or [OPEN]) before or after the amount but Media Key. The High Amount Limit for the media
tendering will be extended with one higher digit. In need of still exceeding this limit, you must call for a Manager
Intervention.
For Amounts through [DOLL DISC], [VND CPN], [STR CPN], [BTL RTN]
To exceed their limits, you must always call for a Manager Intervention. The [LC OPEN] or [OPEN] key will not
be effective. As for the [STR CPN] key only, the amount is limited by both High Amount Limit of the department
through which the store coupon amount is entered and the amount limit for [STR CPN]. That is, when an amount
cannot be entered using [LC OPEN] or [OPEN], you must call for a Manager Intervention.
To exceed their limits, you must always call for a Manager Intervention. The [LC OPEN] or [OPEN] key will not
be effective. As for the [STR CPN] key only, the amount is limited by both High Amount Limit of the department
through which the store coupon amount is entered and the amount limit for [STR CPN]. That is, when an amount
cannot be entered using [LC OPEN] or [OPEN], you must call for a Manager Intervention.
Depress [SI/M] (or [SI1/M] and/or [SI2/M]) for entering the required Department or PLU item, the same way as
[LC OPEN] is operated for Departments and PLUs. The SI-net status is reversed to non-net status, and vice
versa.
[LC OPEN] is operated for Departments and PLUs. The SI-net status is reversed to non-net status, and vice
versa.