Acu-Rite CNC 3500i 사용자 설명서
ACU-RITE 3500i
157
7.
2
C
a
n
n
e
d
C
y
c
le
s
When you enter a value, the CNC executes the number of passes
required to get from the H (StartHgt) to the Z (ZDepth), cutting the
B (DepthCut) on each pass.
required to get from the H (StartHgt) to the Z (ZDepth), cutting the
B (DepthCut) on each pass.
When you do not enter a J (RoughFeed) or K (FinFeed), the CNC
executes feed moves at the current feedrate. J (RoughFeed)
controls the feedrate of the roughing cycle. K (FinFeed) controls the
feedrate of the finishing cycle.
executes feed moves at the current feedrate. J (RoughFeed)
controls the feedrate of the roughing cycle. K (FinFeed) controls the
feedrate of the finishing cycle.
G-code format: G175
Field
Code
Description
FinFeed
K
XY axes finish feedrate. Defaults to last
programmed feedrate.
programmed feedrate.
FinStock
S
Finish-stock amount per side (including
bottom). If not programmed, no finish stock
is left.
bottom). If not programmed, no finish stock
is left.
Type
Q
Specifies the type of entry move;
1=Line Tangent, 2=Line Perpendicular,
3=Arc Tangent, 4=Line Arc Tangent.
3=Arc Tangent, 4=Line Arc Tangent.
Length
M
Length of entry move.
Radius
R
Radius of entry arc.
Angle
C
Angle of entry arc.