Acu-Rite CNC 3500i 사용자 설명서
ACU-RITE 3500i
165
7.
2
C
a
n
n
e
d
C
y
c
le
s
Circular Profile Cycle
The Circular Profile Cycle cleans up the inside or outside profile of an
existing circle.
existing circle.
When executed, the CNC rapids to Ramp#1 starting position, rapids
to H (StartHgt), then feeds to the depth of the first cut.
to H (StartHgt), then feeds to the depth of the first cut.
The machine feeds into the profile along Ramp #1, cuts the circle to
the specified D (Diameter) then ramps away from the work along
Ramp #2.
the specified D (Diameter) then ramps away from the work along
Ramp #2.
When cutting an outside profile, the tool ramps into the work along
Ramp #1 and away from the work along Ramp #2.
Ramp #1 and away from the work along Ramp #2.
The Circular Profile Cycle automatically compensates for tool
diameter. Activate the correct tool diameter before the cycle block.
diameter. Activate the correct tool diameter before the cycle block.
Field
Code
Description
StartHgt
H
Z absolute starting (rapid) height (must be
0.1” or 2 mm above surface to be cut into).
Executed in rapid. (Required)
0.1” or 2 mm above surface to be cut into).
Executed in rapid. (Required)
ZDepth
Z
Absolute depth of the finished profile.
(Required)
(Required)
Diameter
D
Finished diameter of circle. If you enter a
negative value, both the direction of cut and
the starting and endpoints reverse.
(Required)
negative value, both the direction of cut and
the starting and endpoints reverse.
(Required)
Ramp
R
Ramp distance used for each pass.
(Required)
(Required)
XCenter
X
X coordinate of the center. Default: Present
position.
position.
YCenter
Y
Y coordinate of the center. Default: Present
position.
position.
DepthCut
B
Z-axis increment used for each pass
ZFeed
I
Z-axis feedrate