Acu-Rite CNC 3500i 사용자 설명서

ACU-RITE 3500i

Use RMS blocks to Rotate, Mirror, and/or Scale sub-programs. These 
functions turn off when the sub-program ends.



Select "Other Cycles" and then "RMS" from the pop-up 

menu.



Conversational format: RMS

Patterns commanded by the program can be rotated using polar 
coordinates. Any angle can be described as positive or negative, 
depending on how it is referenced. CCW from 0 degrees is positive.  
CW from 0 degrees is negative.



G-code formats: G68

Mirroring reverses the sign (+/-) of subsequent numbers and 
movements, resulting in a reflection of the original pattern.



G-code formats: G100

Use Scaling to enlarge or reduce patterns commanded by the 
program. If a variable word is not given, it is assumed to be x1 factor.  
Axes for circular motion must have the same factor.



Tool length offsets, diameter offsets, tool wear factors, and tool 
diameter compensation are not affected by scaling.



G-code format: G72

Sub#

P

The number designation of the 
sub-program to be used. (required)

#Loops

M

The number of times the sub-program will 
execute before returning back to the main 
program.

StartAngle

F

Polar degree angle which the pattern will 
rotate for the first Loop. Defaults to same 
as Angle.

Angle

C

Polar degree angle which the pattern will 
rotate for the remaining Loops. Defaults to 
same as StartAngle.

XCenter

I

X-Axis coordinate for the point of rotation, 
the point about which rotation occurs.

YCenter

J

Y-Axis coordinate for the point of rotation, 
the point about which rotation occurs.