StarTech.com USB3S2SAT3CB 사용자 설명서

Instruction Manual

3

Installation

WARNING! Hard drives and storage enclosures require careful handling, especially 

when being transported. If you are not careful with your hard disk, lost data may 

result. Always handle your hard drive and storage device with caution. Be sure that 

you are properly grounded by wearing an anti-static strap when handling computer 

components or discharge yourself of any static electricity build-up by touching a large 

grounded metal surface (such as the computer case) for several seconds.
Note: This adapter cable will only work with 2.5” hard drives, and solid state drives.  3.5” 

Hard drives and optical drives require a high power load than can be provided via the 

USB bus.

1.  Connect the SATA Connector to the SATA reciprocal on your 2.5” SATA hard drive/

solid state drive. 

2.  Connect the USB connector from the cable to a USB port on the host computer 

system (optimal perfomance with USB 3.0, backward compatibile with USB 2.0/1.1).

Operation

Once the cable has been attached to a computer, and the necessary software will 

automatically install, and the drive will be accessible as though it were installed within 

the system.
Prior to using the drive, it will need to be formatted according to your operating 

system requirements. To format your newly attached hard drive, or create partitions, 

please consult the documentation that accompanied your operating system at the 

time of purchase.

The hard drive adapter requires no external power supply, as it is capable of receiving 

enough power from the USB Bus to which it is connected