Toshiba DP80F 사용자 설명서
112
The Group Broadcast Transmis-
sion feature allows you to send
a document to multiple remote
parties in a single operation.
sion feature allows you to send
a document to multiple remote
parties in a single operation.
Note that a Group Broadcast
Transmission requires all pages
to be scanned to memory prior
to dialing, and thus adequate re-
sidual memory is required.
Transmission requires all pages
to be scanned to memory prior
to dialing, and thus adequate re-
sidual memory is required.
NOTE:
If the optional handset is in-
stalled, the handset dialing is
not available.
stalled, the handset dialing is
not available.
Load the document face down
in the Document Support (see
page 82).
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
trast if desired (see pages 83
and 84).
Press the One Touch Key pro-
grammed for the desired group.
grammed for the desired group.
Enter the Multi-address Trans-
mission Group Number (1 to
1999).
mission Group Number (1 to
1999).
EXAMPLE:
To enter the Group Number
0001, press:
0001, press:
(Leading zeros, if any, may
be omitted.)
be omitted.)
NOTE:
When an incorrect number is
entered, use
to delete
the preceding digits, or press
once to start over
from the beginning.
When the correct Group Num-
ber is displayed, press:
ber is displayed, press:
ADVANCED FUNCTIONS - MULTI-ADDRESS TRANSMISSION (BROADCASTING)
Group Broadcast Transmission
Load the Document
1
Select the Group
Location
Location
2
Enter the Group
Number
Number
3
Press the START
Key
Key
4
Standby Mode screen
Or, display the Group Dial Di-
rectory by pressing:
rectory by pressing:
+
When document scan-
ning is completed:
ning is completed:
After 2 seconds:
Standby Mode screen
MAY-17 09:43 AM 100%
AUTO RECEIVE
ONE TOUCH = 05
COLORADO GRP
SCANNING DOC. P001
FILE NBR = xxx
GROUP NBR =(1-1999)
[ ]
GROUP NBR =(1-1999)
[ 1]
When document scan-
ning is completed:
ning is completed:
GROUP NBR = 0001
COLORADO GRP
SCANNING DOC. P001
FILE NBR = xxx