Canon MF5750 사용자 설명서
xv
•
Do not install the machine in the following locations:
- A damp or dusty location
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
- A location near devices that contain magnets or generate magnetic fields, such as
speakers
•
Avoid poorly ventilated locations.
During use, the machine generates ozone. However, the amount of ozone generated
is not enough to affect the human body. Nevertheless, if the machine is used for a
prolonged period of time in a poorly ventilated room, or when making a large quantity
of prints, be sure to ventilate the room to make the working environment as
comfortable as possible.
During use, the machine generates ozone. However, the amount of ozone generated
is not enough to affect the human body. Nevertheless, if the machine is used for a
prolonged period of time in a poorly ventilated room, or when making a large quantity
of prints, be sure to ventilate the room to make the working environment as
comfortable as possible.
•
Make sure the machine is approximately 4" (10 cm) away from walls and other
equipment for proper ventilation.
equipment for proper ventilation.
•
Make sure the location is not affected by extreme temperature changes, and always
stays between 50°F and 90.5°F (10°C and 32.5°C).
stays between 50°F and 90.5°F (10°C and 32.5°C).
•
Make sure the relative humidity of the area is between 20% and 80%.
•
Do not use or store the machine outdoors.
Power Supply
WARNING
•
Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
•
Keep the power cord away from a heat source; failure to do this may cause the power
cord coating to melt, resulting in a fire or electrical shock.
cord coating to melt, resulting in a fire or electrical shock.
•
Do not connect or disconnect the power cord with wet hands, as this may result in
electrical shock.
electrical shock.
•
Do not connect the power cord to a multiplug power strip, as this may cause a fire or
electrical shock.
electrical shock.
•
Do not bundle up or tie the power cord in a knot, as this may result in a fire or
electrical shock.
electrical shock.
•
Insert the power plug completely into the power outlet, as failure to do so may result
in a fire or electrical shock.
in a fire or electrical shock.
•
Do not use power cords other than the power cord provided, as this may result in a
fire or electrical shock.
fire or electrical shock.
•
As a general rule, do not use extension cords. Using an extension cord may result in
a fire or electrical shock. If an extension cord must be used, however, use one rated
for voltages of 120 V AC and over, untie the cord binding, and insert the power plug
completely into the extension cord outlet to ensure a firm connection between the
power cord and the extension cord.
a fire or electrical shock. If an extension cord must be used, however, use one rated
for voltages of 120 V AC and over, untie the cord binding, and insert the power plug
completely into the extension cord outlet to ensure a firm connection between the
power cord and the extension cord.