Canon H12250 사용자 설명서

Special Features

Chapter 9

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching system, you will need to dial the
outside line access number first, and then the number of the party you are calling.

You may need to enter pauses in a fax/telephone number in the following situations:
– When you dial or register an overseas number. The length and position of the pause

depends on the telephone system of your country.

– When your machine is connected to a switchboard.

Follow this procedure to enter pauses when registering a number for speed dialing:

When you come to the step that 
requires you to enter the fax/telephone
number, use the numeric buttons to
enter the number up to where a pause
is necessary.

• To correct a mistake in the number, 

press 

¬

to delete the rightmost digit.

Alternatively, press Clear to delete the 
entire number.

Press Pause to enter a pause.

• A pause entered within a number (

P

) is

two seconds long.

• For a longer pause, press Pause again

for another two-second pause.
Alternatively, you can change the length of
the pause (

1 MID PAUSE SET

Continue entering the rest of the fax/
telephone number with the numeric
buttons.

• If you enter the wrong number, press

Clear and start again from step 1.

To enter a pause at the end of the 
number, press Pause.

• A pause at the end of a number (

P

) is

fixed to ten seconds.

Continue with the operation you are
performing.

TEL=011pxxxxxxP

TEL=011pxxxxxx_

TEL=011P_

TEL=011_