Canon H12250 사용자 설명서
4-2
Document Handling
Chapter 4
Document Requirements
The documents you load in the ADF for sending and copying must meet the following
requirements:
requirements:
One-page document
Multipage document of the
same thickness and weight
same thickness and weight
Size
Min. 5.8
¥
4.1 in. (Min. 148
¥
105 mm)
Min. 5.8
¥
4.1 in. (Min. 148
¥
105 mm)
(W
¥
L)
Max. 8.5
¥
Approx. 39.4 in.
Max. 8.5
¥
14 in.
(Max. 216 mm
¥
Approx. 1 m)
(Max. 216
¥
356 mm)
Quantity
1 sheet
Max. 30 letter- or A4-size sheets*
Max. 10 legal-size sheets*
Max. 10 legal-size sheets*
Thickness
0.002 to 0.009 in. (0.06 to 0.23 mm)
0.002 to 0.005 in. (0.06 to 0.13 mm)
Weight
9.3 to 64 lb. (35 to 240 g/m
2
)
10.7 to 24 lb. (40 to 90 g/m
2
)
■ Problem Documents
• To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Carbon paper or carbon-backed paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Onion skin or thin paper
• Remove all fasteners (staples, paper clips, etc.) before loading the document in the ADF.
• Make sure any glue, ink, or correction fluid on the document is completely dry before
• Make sure any glue, ink, or correction fluid on the document is completely dry before
loading it in the ADF.
• If you have a document that will not feed properly in the ADF, make a photocopy of
the document and load the copy instead.
• If you will be sending a document that you have printed from your machine, be sure to
use face-down delivery when printing that document (
1
Scanned Area of a Document
The shaded area shows the scanned
area of a document. Make sure your
document’s text and graphics fall within
this area.
area of a document. Make sure your
document’s text and graphics fall within
this area.
MAX. 0.16"
(MAX. 4 mm)
(MAX. 4 mm)
MAX. 0.16"
(MAX. 4 mm)
(MAX. 4 mm)
MAX. 0.12"
(MAX. 3.0 mm)
(MAX. 3.0 mm)
MAX. 0.12"
(MAX. 3.0 mm)
(MAX. 3.0 mm)
Letter/Legal
* 20 lb. (75 g/m
2
) paper