Canon FAX-JX210 사용자 설명서

Before Using Your Machine

Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone number 
can be registered under each two-digit speed dialing code and you can register up to 60 locations. 
You can also register the name of the party the name appears on the printout of the CODED SPEED 
DIAL TELEPHONE NO. LIST.

Press [Menu].

Use [{] or [}] to select <TEL REGISTRATION>, then press [Start/Copy]. The LCD 
displays <1-TOUCH SPD DIAL>.

Use [{] or [}] to select <CODED SPEED DIAL>, then press [Start/Copy]. The 
LCD displays < 00=>.

Use [{] or [}] to select the two-digit code (00-59) under which you want to register 
the number, then press [Start/Copy] twice.

If a number is already registered under this coded speed dialing code, the number is 
displayed on the LCD.

Enter the party’s number and name the same way you registered them for one-
touch speed dialing.

See steps 5 to 6, “Registering One-touch Speed Dialing Numbers and Names” on page 18.

To assign additional coded speed dialing numbers, repeat from step 4. 
To finish, press [Stop/Reset].

It is recommended to print out a copy of the CODED SPEED DIAL TELEPHONE NO. LIST and keep it for 

reference.
See “Activity Reports” on page 48 for details on printing the list.

To delete the name and number registered under the coded speed dialing code, press [Clear] and 

[Start/Copy] after you perform steps 1 to 4.

TEL=250xxx_