Canon B160 사용자 설명서

다운로드
페이지 139
9-19
LCD messages
9
SOLUTIONS TO COMMON PROBLEMS
CARTRIDGE JAMMED
The cartridge holder 
cannot move. This is 
normally due to a paper 
jam. 
Clear the paper jam or 
whatever is obstructing 
the cartridge holder and 
then press [Start] and 
start again. Do not 
attempt to move the 
cartridge holder 
manually.
CHANGE CARTRIDGE 
You pressed [Cartridge] 
and the cartridge holder 
is moving to the centre 
of the fax.
Wait until the cartridge 
holder stops, then 
replace the BJ cartridge 
(see p. 9-8). When you 
are finished, press 
[Cartridge] and close the 
printer cover. Wait for the 
fax to return to standby 
mode.
The BJ cartridge is 
empty or its ink may 
have dried out.
Clean the BJ cartridge 
print head (see p. 9-8). If 
the message remains on 
the LCD, replace the BJ 
cartridge (see p. 9-8). 
The fax will then print 
automatically any 
documents received in 
memory.
CHECK DOCUMENT
#001
The document is 
jammed in the Automatic 
Document Feeder 
(ADF).
Remove the document 
you are trying to send or 
copy (see p. 9-2) and 
start again.
CHECK PAPER SIZE 
The size of the paper in 
the multi-purpose tray 
and that specified in the 
PAPER SIZE setting are 
different.
Load the correct paper 
size or change the 
PAPER SIZE setting. 
(see p. 8-5) 
CHECK PRINTER 
There may be an 
obstruction that is not 
allowing the cartridge 
holder mechanism to 
move.
Check for any 
obstruction (paper clip, 
small object, etc.) and 
also that the orange 
protective cap and tape 
are removed from the BJ 
cartridge. Check also for 
a paper jam and clear 
the jam if necessary 
(see p. 9-3). Then press 
[Start] and start again.
Message
Error Code
Cause
Action