Canon B160 사용자 설명서
6-12
Sequential broadcasting
Sending a document to more than one location
Sequential broadcasting sends one document to more than one location.
You can send to a total of 113 locations as follows:
You can send to a total of 113 locations as follows:
One-touch speed dialling
= 12 locations
Coded speed dialling
= 100 locations
Regular dialling (Numeric buttons dialling) =
1 location
You can enter the one-touch speed dialling, coded speed dialling and regular dialling locations in any order.
Remember that when using regular dialling, you must press [Set] after entering the number.
You can send up to 20*A4-size pages.
Remember that when using regular dialling, you must press [Set] after entering the number.
You can send up to 20*A4-size pages.
1
Load the document face down into the Automatic
Document Feeder (ADF).
Document Feeder (ADF).
See Loading documents, p. 3-3.
You can set the scanning resolution and contrast. (see p. 6-2)
You can set the scanning resolution and contrast. (see p. 6-2)
2
Dial the receiving party’s fax number.
• You can also press [Redial/Pause] to redial the last number
dialled with the numeric buttons.
• You must press the second button within 5 seconds of the
first one, and each subsequent button within 10 seconds of
the preceding one. The fax begins the operation
approximately 10 seconds after you press the last button.
the preceding one. The fax begins the operation
approximately 10 seconds after you press the last button.
3
Press [Start].
• The fax reads the document into memory and begins
sending.
• To cancel a transmission, press [Stop] during dialling or
transmission. All transmissions in the sequence are
cancelled.
cancelled.
DOCUMENT READY
TEL= 34567890
Start / Resume
TX/RX NO.
0007
1 sec.
SCANNING
P.001
* A maximum of 42 pages (Canon FAX Standard Chart No.1, standard resolution) can be scanned into fax memory. A
maximum of 20 pages can be loaded into the ADF.