Canon L280 사용자 설명서

❏ For Windows 2000 with USB port connection: Are you not able to 

During the installation, you may be unable to continue beyond the dialog 
box prompting you to connect your printer cable to your port. (If you 
cannot continue, the system is unable to display the found new hardware 
wizard, described in Step 6 in the “Installing the Software” section in 
Chapter 2.)

In this situation, you need to exit the setup, remove the device from the 
Windows Device Manager, and restart the installation process.

To resolve this situation:
1.

Click No in the dialog box prompting you to connect your cable, and 

exit the setup.

2.

Remove the device from the Windows Device Manager. The device 

may appear listed as Canon FAX-L280 or Unknown Device.

To remove the device: Click Start, point to Settings and then click 
Control Panel. In the Control Panel window, double-click System. On 
the Hardware tab, click Device Manager. Under Universal Serial Bus 
Controllers or Other Devices, click the device and press the Delete 
key.

If you are unable to remove the device, unplug the printer from the 
electrical outlet to turn it off. Then, plug the printer into the electrical 
outlet again.

3.

Disconnect your printer cable from the port.

4.

Start the installation process again. For instructions, see Chapter 2, 

“Installing the Printer Driver.”

❏ For Windows 98/Me with USB port connection: Are you not able to 

During the installation, you may be unable to continue beyond the dialog 
box prompting you to connect your printer cable to your port.

In this situation, you need to exit the setup, remove the device from the 
Windows Device Manager, and restart the installation process.