Canon B822 사용자 설명서
9-2
Periodic cleaning
Your fax requires little periodic maintenance. This section describes the necessary cleaning
procedures for the fax. Please note the following before cleaning:
• Be sure to disconnect the power cord before cleaning the fax. Since documents in memory are
procedures for the fax. Please note the following before cleaning:
• Be sure to disconnect the power cord before cleaning the fax. Since documents in memory are
erased when the power is disconnected, print any documents stored in memory before
disconnecting the power cord (see p. 5-14).
disconnecting the power cord (see p. 5-14).
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges.
Cleaning the exterior of the fax _______________
Cleaning the interior of the fax ________________
■ Cleaning inside the printer cover
To prevent ink spots and paper dust from accumulating inside the fax and affecting print quality,
clean the print area of the fax periodically.
clean the print area of the fax periodically.
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to
clean the interior of the fax.
clean the interior of the fax.
1
Disconnect the power cord from the fax.
2
Wipe the exterior of the fax with a clean, soft, lint-free cloth moistened with water or
diluted dishwashing detergent solution.
diluted dishwashing detergent solution.
3
When you are finished, reconnect the power cord.
1
Disconnect the power cord from the fax.
2
Open the printer cover.
3
Use a clean, soft, dry, lint-free cloth to remove any ink or paper debris from the interior of
the fax (shaded area), especially around the four pinch rollers.
the fax (shaded area), especially around the four pinch rollers.
Dirt and dust particles that collect on the underside of the printer cover affect the quality of the
documents you copy or send.
documents you copy or send.
Be careful not to touch the BJ cartridge or its holder.
Do not touch the components or any metal parts.
Pinch rollers