Canon B640 사용자 설명서
56
Canceling Sending ______________________________
To stop sending before the fax is finished, press [STOP]. Then you may need to open
the operation panel to remove the document, see Clearing document jams, p. 58.
the operation panel to remove the document, see Clearing document jams, p. 58.
Redialing ________________________________________
■ Manual
To start dialing again, just press [REDIAL/PAUSE]. (When you press [REDIAL/
PAUSE], the previous number dialed with the numeric buttons is redialed.)
PAUSE], the previous number dialed with the numeric buttons is redialed.)
■ Automatic
The FAXPHONE automatically redials twice after the first attempt at sending fails
(eg. the line was busy).
The time between redials is two minutes.
You can change the number of redials and the time between redials by changing the
TX SETTINGS (see p. 76).
If the FAXPHONE fails to get through after the second redial, the FAXPHONE beeps.
(eg. the line was busy).
The time between redials is two minutes.
You can change the number of redials and the time between redials by changing the
TX SETTINGS (see p. 76).
If the FAXPHONE fails to get through after the second redial, the FAXPHONE beeps.
The LCD displays REDIALING while the FAXPHONE is in the redialing process.
REDIALING
■ To cancel automatic redialing
You can cancel automatic redialing anytime by pressing the [STOP] button.
However, when memory is used during sending (including Delayed Sending and Se-
quential Broadcasting), you cannot cancel redialing while REDIALING is displayed
on the LCD. In this case, wait until dialing begins, then press [STOP] to cancel redialing.
However, when memory is used during sending (including Delayed Sending and Se-
quential Broadcasting), you cannot cancel redialing while REDIALING is displayed
on the LCD. In this case, wait until dialing begins, then press [STOP] to cancel redialing.