Genicom 3850/3870 Plus 사용자 설명서

LCD Display Messages 

 

GB-16 

The display messages can be divided into different groups: 

- Initial Set Up (ISU) Menu 
- System Menu 
- Operational Menu 
- Paper path intermediate status 
- Printer fault status (error messages) 
- Printer On Line status 
- Messages from the Host 

When an error condition occurs: 
•  the printer enters in WAIT state.  
•  the display will show the first message indicating the error. Then, 

another second message will be displayed giving more specific 
information about the error condition. 

After you have alleviated the error condition, press the ON LINE  key to clear the 

error condition. 

A.G.A. NOT OPER. 
ADJUST THE GAP 

Indication: The automatic gap adjustment (A.G.A)  
is not enabled. 
Solution:  Adjust the gap manually. Press the 

ON

 

LINE

 

key to clear the error condition. 

BUFFER OVERFLOW 
CHARACTER LOST 

Indication: An overflow condition occurs in the buffer 
 (if the serial interface is selected). 
Solution:  Turn the printer off and the buffer will be 
cleared. Press the 

ON LINE

 key to clear the error 

condition. 

DATA SET OFF 

Indication: The printer detects a remote connection serial 
interface error. The DST or DCD signal was not sensed. 

Solution: Press the 

ON LINE

 key to clear the error 

condition. 

FRAMING ERROR 
WRONG CHARACTER 

Indication: The stop bit is not detected on complexion 
 of the next reception. 
Solution: Press the 

ON LINE

 key to clear the error 

condition. 

INTERLOCK ERROR 
CHECK INSERTION 

Indication: At power on, the rear tractor assembly  
or the rear cover has not been correctly inserted. 
Solution: Press the 

ON LINE

 key to clear the error 

condition.