Ricoh 2400L 사용자 설명서

1.  Attach the handset stand to the bracket

by two screws. (A)
Then attach the bracket with stand to
the machine by two screws. (B)

2. To avoid slack wire hanging at the rear of

the machine, attach the cord clip.
1) Insert the cord into the clip about two
    thirds down (see diagram).
2) Peel off the adhesive cover on the
    cord clip.
3) Fix the cord clip to the handset
    bracket as shown.

3. Plug the cable to "Tel" jack on rear side of

the machine.

Switch off the power before you install the optional feature expander.

1. Remove the cover on the left side of the

machine.  

2. Insert the memory card with the printed

face up.
Make sure that the machine and card
contacts touch.  

3. Replace the cover. Then switch on the

power.

INSTALLATION