Ricoh 2400L 사용자 설명서
Sending to Just One Location
1. Make sure that the machine is in standby
mode:
The display on the operation panel must
be as shown on the right.
The display on the operation panel must
be as shown on the right.
READY 100% 10:00AM
SET DOC. OR DIAL NO.
2. Carefully place your fax message face
down into the auto document feeder.
Note: You can dial without placing the
message in the feeder first. Place the
document after you dial the number and
go to step 4.
Note: You can dial without placing the
message in the feeder first. Place the
document after you dial the number and
go to step 4.
TRANSMIT OPTIONk
DIAL FAX NUMBER
p
The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
feeder, with the first page at the bottom of the
stack.
p
Feed the pages in so that the top edge goes in
first.
first.
p
Do not feed in more than 30 pages.
p
Do not use unsuitable types of original (see
pages 56 and 57).
pages 56 and 57).
p
Adjust the document guides to fit the width of
the pages.
the pages.
p
Do not use pages of different sizes.
p
The pages should be arranged loosely,
but the leading edges should be tidy, as
shown above.
but the leading edges should be tidy, as
shown above.
Selecting Contrast and Resolution: See page 66.
Options for Sending a Message: See page 71.
Options for Sending a Message: See page 71.
SENDING A FAX MESSAGE
ROUTINE OPERATION
60