Ricoh 2400L 사용자 설명서

Transfer Request

Transfer Request helps you save costs when you send the same message to
more than one place in a distant area.

p

Your machine sends the message to the Transfer Station, which holds it in
memory.

p

The Transfer Station then sends it on to each of the End Receivers in
sequence.

p

After broadcasting, the Transfer Station sends your machine a Transfer Result
Report to tell you if there were any problems with the communication.

p

This feature can only be used if the Transfer Station was made by the
same maker as your machine.

p

The ID Code of your machine must be the same as the ID Code of the
Transfer Station.

p

Your fax machine’s telephone number must have been programmed in
advance.

p

The Transfer Station must have memory space available, and must be
able to act as a Transfer Station (some machines cannot do this, or
can but the capability has been switched off).

Note: This machine cannot be a Transfer Station.

You cannot dial the End Receivers as full numbers on your ten-key pad, and you
cannot use your own stored Speed Dials, Quick Dials, and Groups. You must use
the numbers that are stored in the Transfer Station. Always keep a copy of the
Transfer Station’s Telephone Lists (Quick Dial, Speed Dial, and Group Lists) near
the machine if you plan to use Transfer Request.

Cross-reference
Quick Dial and Speed Dial: see pages 42 and 44.        Groups: see page 43.
ID Code: see page 93.

ADV

ANCED

FEA

T

UR

E

S

 TRANSFER REQUEST