Ricoh 2400L 사용자 설명서

When you receive a message, the time is printed at the bottom of the page.
However, this is the time at the transmitting end or printing end. To check the local
time, you have to print the TCR.

However, if you switch on Reception Time, the local time is also printed at the
bottom of on each page that you receive. The time is taken from your machine’s
internal clock, and is the same as the time that will be printed on the TCR. Switch
this feature on if you often receive fax messages from other countries.

Cross-references
TCR: see page 123.

Date and Time: see page 188.

To switch this feature on, do the following. (See page 168 if you need more
information about the User Parameter settings adjustment procedure).

1. Function 6 2 2 2 2 6 3 and Yes.

SETTING?            Y/j

PRINT LIST j

2. Press 

Yes. The settings for switch 00 are

now shown on the bottom line of the dis-
play.

               KPAD/Y/j k

SWITCH 00 : 0000 0000

3. Press 

k

 until the settings for switch 02 are

shown.

               KPAD/Y/j k

SWITCH 02 : 0000 0000

The setting that you need to change is digit
2 (double underlined).

SWITCH02 : 0000 0100

Digit 2 (Double underlined)
0: The Reception Time will not be
    printed.
1: The Reception Time will be
    printed.

4. If you wish to change the setting, press 2

on the ten keypad.

5. Finish: Yes and Function. 

If the machine receives a page that is longer than the paper in the cassette, the
machine reduces the length of the received image so that it will fit on one page, if
the image length is within the following limits.

Paper size in the cassette

Maximum reducible incoming page length

Letter (11")

14.4"

Legal (14")

16.2"

If the received image is longer than the above limits, there is no reduction and the
image is split up and printed on two sheets of paper. Normally, the last 0.4 inch of
the received image will be repeated at the beginning of the next page.

RECEPTION