Ricoh 2400L 사용자 설명서
ADF (Automatic Document Feeder):
A device which feeds the pages of a multipage document one at a time, in the
order that you arranged the pages in the stack.
A device which feeds the pages of a multipage document one at a time, in the
order that you arranged the pages in the stack.
Batch Numbering (Page Count):
This is a way of numbering pages that allows you to check whether you received
all pages, and if not, which ones are missing. For example, if you receive two
pages with p1/3 printed on one and p2/3 on the other, you have just received a
three-page document but page 3 didn’t make it.
This is a way of numbering pages that allows you to check whether you received
all pages, and if not, which ones are missing. For example, if you receive two
pages with p1/3 printed on one and p2/3 on the other, you have just received a
three-page document but page 3 didn’t make it.
BPS (Bits Per Second):
This is the data communication rate. In G3 mode, your fax terminal digitizes
documents, transforming them into ’bits’ - binary digits - (an average page will
produce about 200,000 of them), and then sends them out at a top speed of
9,600 to 14,400 bps, depending on the model.
This is the data communication rate. In G3 mode, your fax terminal digitizes
documents, transforming them into ’bits’ - binary digits - (an average page will
produce about 200,000 of them), and then sends them out at a top speed of
9,600 to 14,400 bps, depending on the model.
Broadcasting:
In G3 fax communication terminology, broadcasting is the transmission of a
document to more than one address in sequence, not simultaneously.
In G3 fax communication terminology, broadcasting is the transmission of a
document to more than one address in sequence, not simultaneously.
Communication:
Transmission or reception.
Transmission or reception.
Copy:
When used as a noun, this refers to a printout, either in copy mode or receive
mode
When used as a noun, this refers to a printout, either in copy mode or receive
mode
Country Code:
In international dialing, this is the code that directs the call to the country where
the terminal that you wish to send to is located.
In international dialing, this is the code that directs the call to the country where
the terminal that you wish to send to is located.
CSI:
Called Subscriber Identification.
Called Subscriber Identification.
☞
page 207.
Default Setting:
See "Factory Setting".
See "Factory Setting".
Dial Pulses:
These are dialing signals that your terminal sends out if it uses pulse dialing (
These are dialing signals that your terminal sends out if it uses pulse dialing (
☞
page 208).
Document:
This is the original page or set of pages that you wish to send.
This is the original page or set of pages that you wish to send.
DPI (Dots Per Inch), or l/mm (Lines Per Millimeter):
This is the unit of resolution. The scanner scans your document according to the
selected resolution. An 8-1/2" x 11" page is broken down into about 1,728,000
dots if standard resolution is used (Digital compression techniques for G3
convert these into about 200,000 bits).
This is the unit of resolution. The scanner scans your document according to the
selected resolution. An 8-1/2" x 11" page is broken down into about 1,728,000
dots if standard resolution is used (Digital compression techniques for G3
convert these into about 200,000 bits).
GLOSSARY
GLOSSAR
Y
223