Ricoh 3245 사용자 설명서
Faxing
32
2
AAAA
Press [Original Type].
BBBB
Select the original type you re-
quire, and then press [OK].
quire, and then press [OK].
Image Density (Contrast)
The text and diagrams on originals
should stand out clearly from the pa-
per they are on. If your original has a
darker background than normal (for
example, a newspaper clipping), or if
the writing is faint, adjust the image
density.
should stand out clearly from the pa-
per they are on. If your original has a
darker background than normal (for
example, a newspaper clipping), or if
the writing is faint, adjust the image
density.
❖
❖
❖
❖ Auto Image Density
The appropriate density setting for
the original is automatically select-
ed.
the original is automatically select-
ed.
❖
❖
❖
❖ Manual Image Density
Use manual image density to set
image density yourself.
You can select one of seven image
density levels.
image density yourself.
You can select one of seven image
density levels.
❖
❖
❖
❖ Combined Auto and Manual Image
Density
You can only adjust image density
for photographs, illustrations, or
diagrams if the original has a dark
background.
You can select one of seven image
density levels.
for photographs, illustrations, or
diagrams if the original has a dark
background.
You can select one of seven image
density levels.
Note
❒ Selecting [Text] or [Text / Photo] for
the original type causes [Auto Image
Density]
Density]
to be selected.
❒ You can set the image density that
is selected right after the machine
is turned on or modes are cleared,
with [Auto Image Density] under
Gen. Settings/ Adjust. See p.144
“General Settings/Adjustment”,
Facsimile Reference <Advanced Fea-
tures> .
is turned on or modes are cleared,
with [Auto Image Density] under
Gen. Settings/ Adjust. See p.144
“General Settings/Adjustment”,
Facsimile Reference <Advanced Fea-
tures> .
AAAA
Select the type of image density.
Auto Image Density
A Make sure that [Auto Image Den-
sity]
is selected.
Manual Image Density
A Make sure that [Auto Image Den-
sity]
is not selected. If it has
been selected, press [Auto Image
Density]
Density]
to turn it off.
JupterC2_Fax_EN-F_FM.book Page 32 Tuesday, November 30, 2004 2:47 PM