Ricoh 2000 사용자 설명서
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
Sender Settings
97
2
D
Enter the PIN Code, and then press the {OK} key.
The standby display appears.
If you make a mistake, press the {Clear/Stop} key before pressing the {OK}
key, and then try again.
If you make a mistake, press the {Clear/Stop} key before pressing the {OK}
key, and then try again.
E
Press the {Start} key.
Note
❒ For the maximum number of digits you can use in a PIN Code, see “Max-
imum Values”.
❒ You can enter numbers, p, q, and pauses.
❒ PIN Codes are not printed in lists and reports.
❒ You can set the machine so that a PIN Code must be entered after the fax num-
❒ PIN Codes are not printed in lists and reports.
❒ You can set the machine so that a PIN Code must be entered after the fax num-
ber before you can send a fax. For details, contact your service representative.
Reference
p.186 “Maximum Values”
“Fax Features”, General Settings Guide
p.186 “Maximum Values”
“Fax Features”, General Settings Guide