Premier Mounts CDM-600 사용자 설명서
CDM-600 Satellite Modem
Revision 7
Physical Description
MN/CDM600.IOM
4–5
4.3.12 IDI,
DDO
Connectors (J10A and J11A)
Two additional female BNC 75
Ω connectors for unbalanced operation at the G.703 data
rate of E1 (2.048 Mbps). These are the Insert Data In (IDI) and Drop Data Out (DDO)
port.
An alternative use for these ports is for sub-rate G.703 auxiliary operation on modems
with hardware revision 2.0 or higher. This permits operation at the additional rates of 512
and 1024 kbps. In this mode, IDI serves as the TX terrestrial input port, and DDO as the
output port.
port.
An alternative use for these ports is for sub-rate G.703 auxiliary operation on modems
with hardware revision 2.0 or higher. This permits operation at the additional rates of 512
and 1024 kbps. In this mode, IDI serves as the TX terrestrial input port, and DDO as the
output port.
4.3.13
Unbalanced G.703 Tx/Rx (J10B and J11B)
Two female BNC 75
Ω connectors for unbalanced operation at the G.703 data rates of E1
(2.048 Mbps), T2 (6.312 Mbps), or E2 (8448 kbps).
4.3.14 External
Frequency
Reference Connector (J12)
This is an SMA female connector. It is an optional connector used to permit the
connection of a high-stability external reference signal.