Netgear N300 사용자 설명서
Supplemental Information
109
N300 Wireless ADSL2+ Modem Router DGN2200v3
Factory Settings
You can return the modem router to its factory settings. On the bottom of the modem router,
use the end of a paper clip or some other similar object to press and hold the Restore Factory
Settings button for at least 7 seconds. The modem router resets, and returns to the factory
settings.
use the end of a paper clip or some other similar object to press and hold the Restore Factory
Settings button for at least 7 seconds. The modem router resets, and returns to the factory
settings.
Your device will return to the factory configuration settings shown in the following
table.
Table 3. Factory Default Settings
Feature
Default Behavior
Router Login
User login URL
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
connection
WAN MAC address
Use default address
WAN MTU size
1492
Port speed
Autosensing
Local network
(LAN)
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
Local network
(LAN) continued
(LAN) continued
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ
Enabled or disabled
Time zone
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
for NA
Time zone adjusted for daylight
savings time
savings time
Disabled
SNMP
Disabled
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled