Netgear N300 사용자 설명서

Manual Method



Open the software that manages your wireless connections on the wireless device 

(laptop computer, gaming device, iPhone) that you want to connect to your modem 

router. This software scans for all wireless networks in your area.

Look for your network and select it. If you did not change the name of your network during 

the setup process, look for the default Wi-Fi network name (SSID) and select it. The default 

Wi-Fi network name (SSID) is located on the product label on the bottom of the modem 

router.

Enter the modem router passphrase and click Connect. The default modem router 

passphrase is located on the product label on the bottom of the modem router.

Repeat steps 1–3 to add other wireless devices.

Wi-Fi Protected Setup (WPS) Method

Wi-Fi Protected Setup (WPS) is a standard that lets you easily join a secure wireless network 
with WPA or WPA2 wireless security. The modem router automatically sets security for each 
computer or device that uses WPS to join the wireless network. To use WPS, make sure that 
your wireless devices are Wi-Fi certified and support WPS. NETGEAR products that use 
WPS call it Push 'N' Connect.

1

 

If the wireless network name (SSID) changes each time you add a 

WPS client, the Keep Existing Wireless Settings check box on the 
Advanced Wireless Settings screen has been cleared. See 

on page 86 for more information about this setting.

You can use a WPS button or the modem router interface method to add wireless computers 
and devices to your wireless network.



Press the 

 WPS button on the modem router front panel.

Within 2 minutes, press the WPS button on your wireless computer or device, or follow the 

WPS instructions that came with the computer. The device is now connected to your modem 

router.

Repeat steps 1–2 to add other WPS wireless computers or devices.



Select Add WPS Client at the top of the modem router menus.