Netgear N300 사용자 설명서

Click Add to open the following screen.

Fill in the fields:

In the Route Name field, enter a route name for this static route. This name is for 

identification purpose only. 

Select Private if you want to limit access to the LAN only. The static route will not be 

reported in RIP. 

Select Active to make this route effective. 

Enter the destination IP address of the final destination. 

Enter the IP subnet mask for this destination. If the destination is a single host, type 

. 

Enter the gateway IP address, which has to be a router on the same LAN segment as 
the modem router. 

In the Metric field, enter a number between 2 and 15 as the metric value. This 

represents the number of routers between your network and the destination. Usually, 
a setting of 2 or 3 works. 

Click Apply to save your changes. The Static Routes table is updated to show the new 

entry.

Universal Plug and Play

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, 
access the network and connect to other devices as needed. UPnP devices can 
automatically discover the services from other registered UPnP devices on the network.