Netgear N300 사용자 설명서

Set the Traffic Counter to begin at a specific time and date.

Set up Traffic Control to issue a warning message before the monthly limit of Mbytes or 

hours is reached. You can select one of the following to occur when the limit is attained:

The Internet LED flashes green or amber. 

The Internet connection is disconnected and disabled.

Set up Internet Traffic Statistics to monitor the data traffic.

Click the Traffic Status button if you want a live update on Internet traffic status on your 

modem router.

Click Apply to save your settings.

Wireless Bridging and Repeating Networks

If you want to use the Wireless Repeating feature, you have to go to 

the Wireless Settings screen and change the wireless security 
setting of the router to WEP or None, and you have to change the 
Channel field to a different setting than Auto, which is the default. 
For more information, see 

on page 33.

With the modem router, you can build large bridged wireless networks that form an 
IEEE 802.11n Wireless Distribution System (WDS). Using the modem router with other 
access points (APs) and wireless devices, you can connect clients using their MAC 
addresses rather than IP addresses. Here are some examples of wireless bridged 
configurations:

. The modem router communicates with another bridge-mode 

wireless station. See 

. The modem router is the “master” for a group of bridge-mode wireless 

stations. Then all traffic is sent to this master, rather than to other access points. See 

. Sends all traffic to the remote access point. 

on page 97.

The wireless bridging and repeating feature uses the default security profile to send and 
receive traffic.