Netgear FVS318N 사용자 설명서

SSID

The wireless network name (SSID) for the wireless profile. The default SSID 
name is FVS318N_1. You can change this name by entering up to 
32 alphanumeric characters. Make sure that additional SSIDs have unique 
names.

Broadcast SSID

Select the check box to enable the wireless VPN firewall to broadcast its SSID, 
allowing wireless stations that have a null (blank) SSID to adopt the wireless 
VPN firewall’s SSID. To prevent the SSID from being broadcast, clear the check 
box.

Security

Before you configure security, you might want to read 

on page 111.

Specify the wireless security by making a selection from the drop-down list:

• OPEN. This is the default setting. An open system has no authentication and 

no encryption, and therefore no security configuration. However, you can use 
an open system with encryption. To do so, select WEP from the Security 
drop-down list. In the WEP Index and Keys section of the screen, take the 
following steps:

- Select Open System authentication.

- Select the encryption.

- Enter a passphrase and generate a key, or enter a key manually.

• WEP. To configure WEP, take the following steps in the WEP Index and Keys 

section of the screen:

- Select Shared Key authentication.

- Select the encryption.

- Enter a passphrase and generate a key, or enter a key manually.

•  WPA. To configure WPA, select the encryption and authentication. The 

remaining configuration depends on the selected authentication:

- For WPA-PSK, select a password. 

- For WPA with RADIUS, configure the RADIUS server settings.

- For WPA with PSK+RADIUS, select a password and configure the 

RADIUS server settings.

•  WPA2. To configure WPA2, select the encryption and authentication. The 

remaining configuration depends on the selected authentication:

- For WPA2-PSK, select a password. 

- For WPA2 with RADIUS, configure the RADIUS server settings. As an 

option, you can enable RADIUS preauthentication.

- For WPA2 with PSK+RADIUS, select a password and configure the 

RADIUS server settings. As an option, you can enable RADIUS 
preauthentication.

•  WPA+WPA2. To configure WPA, select the encryption and authentication. 

The remaining configuration depends on the selected authentication:

- For WPA+WPA2 with PSK, select a password. 

- For WPA+WPA2 with RADIUS, configure the RADIUS server settings.

- For WPA+WPA2 with PSK+RADIUS, select a password and configure the 

RADIUS server settings.