Netgear FVS318N 사용자 설명서
Wireless Configuration and Security
122
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
WARNING:
When you configure the wireless VPN firewall from a wireless
computer whose MAC address is not in the access control list and
when the ACL policy status is set to deny access, you will lose
your wireless connection when you click Apply. You then need to
access the wireless VPN firewall from a wired computer or from a
wireless computer that is on the access control list to make any
further changes.
computer whose MAC address is not in the access control list and
when the ACL policy status is set to deny access, you will lose
your wireless connection when you click Apply. You then need to
access the wireless VPN firewall from a wired computer or from a
wireless computer that is on the access control list to make any
further changes.
To remove one or more MAC addresses from the table:
1.
In the MAC Address table, select the check box to the left of each MAC address that
you want to delete, or click the Select All table button to select all MAC addresses.
you want to delete, or click the Select All table button to select all MAC addresses.
2.
Click the Delete table button.
View the Status of a Wireless Profile
To view the status of a specific wireless profile:
On the Wireless Profiles screen (see
on page 115), click the Status button in the
Status column for the wireless profile for which you want to display the status information.
The Wireless Profile Status screen displays:
The Wireless Profile Status screen displays:
Figure 59.
To change the poll interval period, enter a new value in the Poll Interval field, and then click
Set interval. To stop polling, click Stop.
Set interval. To stop polling, click Stop.
The following table explains the fields of the Wireless Profile Status screen.