Netgear FVS318N 사용자 설명서

Test Basic Wireless Connectivity

After you have configured the wireless VPN firewall as explained in the previous sections, 
test your wireless clients for wireless connectivity before you place the wireless VPN firewall 
at its permanent position.



Configure the 802.11b/g/n wireless clients so that they all have the same SSID that you 
have configured on the wireless VPN firewall. Make sure that the wireless mode on the 
wireless VPN firewall supports the wireless capacity of the wireless clients. (For 
example, 802.11b-compliant devices cannot connect to the wireless VPN firewall if the 
wireless mode is set to ng.)

Verify that your wireless clients have a link to the wireless VPN firewall. If you have enabled 
the DHCP server on the wireless VPN firewall (see 

(for IPv4) and 

on page 73), verify that your wireless clients are able 

to obtain an IP address through DHCP from the wireless VPN firewall.

Verify network connectivity by using a browser such as Internet Explorer 7.0 or later or 
Mozilla Firefox 4.0 or later to browse the Internet, or check for file and printer access on your 
network.

If you have trouble connecting to the wireless VPN firewall, try to connect without security by 
selecting OPEN from the Security drop-down list on the Edit Wireless Profiles screen for the 
profile that you are using. If that does not help you to solve the connection problem, see 

.