Netgear FVS318N 사용자 설명서

Enter the settings as explained in 

on page 131. In addition to selections from the 

Service, Action, and Log drop-down lists, you need to make selections from the following 
drop-down lists:

DMZ Users

WAN Users

Unless your selection from the Action drop-down list is BLOCK always, you also need to 
make selections from the following drop-down lists:

Select Schedule

QoS Priority

Click Apply. The new rule is now added to the Outbound Services table. The rule is 
automatically enabled.

Create DMZ WAN Inbound Service Rules

The Inbound Services table lists all existing rules for inbound traffic. If you have not defined 
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the DMZ) is 
blocked.

Inbound rules that are configured on the LAN WAN Rules screen take precedence over 
inbound rules that are configured on the DMZ WAN Rules screen. As a result, if an inbound 
packet matches an inbound rule on the LAN WAN Rules screen, it is not matched against the 
inbound rules on the DMZ WAN Rules screen. 



In the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by 
default. The screen displays the IPv4 settings (see 

Click the Add table button under the Inbound Services table. The Add DMZ WAN 
Inbound Service screen for IPv4 displays: