Netgear FVS318N 사용자 설명서

다운로드
페이지 425
Firewall Protection
183
 ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Enable Source MAC Filtering
The Source MAC Filter screen enables you to permit or block traffic coming from certain 
known computers or devices.
By default, the source MAC address filter is disabled. All the traffic received from computers 
with any MAC address is allowed. When the source MAC address filter is enabled, 
depending on the selected policy, traffic is either permitted or blocked if it comes from any 
computers or devices whose MAC addresses are listed in MAC Addresses table.
Note:  
For additional ways of restricting outbound traffic, see 
To enable MAC filtering and add MAC addresses to be permitted or blocked:
1. 
Select Security > Address Filter. The Address Filter submenu tabs display, with the 
Source MAC Filter screen in view. (The following figure shows one address in the MAC 
Addresses table as an example.)
Figure 98.  
2. 
In the MAC Filtering Enable section, select the Yes radio button.