Netgear FVS318N 사용자 설명서
Virtual Private Networking Using IPSec and L2TP Connections
242
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3.
Click Apply to save your settings.
Note:
You can select the RADIUS authentication protocol (PAP or CHAP)
on the Edit IKE Policy screen or Add IKE Policy screen (see
Secret Phrase
A shared secret phrase to authenticate the transactions between the client
and the primary RADIUS server. The same secret phrase needs to be
configured on both the client and the server.
and the primary RADIUS server. The same secret phrase needs to be
configured on both the client and the server.
Primary Server NAS
Identifier
Identifier
The primary Network Access Server (NAS) identifier that needs to be present
in a RADIUS request.
in a RADIUS request.
Note:
The wireless VPN firewall functions as an NAS, allowing network
access to external users after verification of their authentication information.
In a RADIUS transaction, the NAS needs to provide some NAS identifier
information to the RADIUS server. Depending on the configuration of the
RADIUS server, the wireless VPN firewall’s IP address might be sufficient as
an identifier, or the server might require a name, which you need to enter in
this field.
In a RADIUS transaction, the NAS needs to provide some NAS identifier
information to the RADIUS server. Depending on the configuration of the
RADIUS server, the wireless VPN firewall’s IP address might be sufficient as
an identifier, or the server might require a name, which you need to enter in
this field.
Backup RADIUS Server
To enable and configure the backup RADIUS server, select the Yes radio button, and then enter the
settings for the three fields to the right. The default setting is that the No radio button is selected.
settings for the three fields to the right. The default setting is that the No radio button is selected.
Backup Server IP Address
The IPv4 address of the backup RADIUS server.
Secret Phrase
A shared secret phrase to authenticate the transactions between the client
and the backup RADIUS server. The same secret phrase needs to be
configured on both the client and the server.
and the backup RADIUS server. The same secret phrase needs to be
configured on both the client and the server.
Backup Server NAS
Identifier
Identifier
The backup Network Access Server (NAS) identifier that needs to be present
in a RADIUS request.
in a RADIUS request.
Note:
See the note earlier in this table for the Primary Server NAS Identifier.
Connection Configuration
Time out period
The period in seconds that the wireless VPN firewall waits for a response from
a RADIUS server. The default setting is 30 seconds.
a RADIUS server. The default setting is 30 seconds.
Maximum Retry Counts
The maximum number of times that the wireless VPN firewall attempts to
connect to a RADIUS server. The default setting is 4 retry counts.
connect to a RADIUS server. The default setting is 4 retry counts.
Table 56. RADIUS Client screen settings (continued)
Setting
Description