Netgear FVS318N 사용자 설명서
Virtual Private Networking Using SSL Connections
277
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
•
IPv6. Select the IPv6 radio button. The SSL VPN Client screen displays the IPv6
settings (the following screen shows some examples).
settings (the following screen shows some examples).
Figure 167. SSL VPN Client screen for IPv6
3.
Complete the settings as explained in the following table:
Table 68. SSL VPN Client screen settings for IPv4 and IPv6
Setting
Description
Client IP Address Range
Enable Full Tunnel Support
Select this check box to enable full-tunnel support. If you leave this check box
cleared (which is the default setting), full-tunnel support is disabled but
split-tunnel support is enabled, and you need to add client routes (see
cleared (which is the default setting), full-tunnel support is disabled but
split-tunnel support is enabled, and you need to add client routes (see
Note:
When full-tunnel support is enabled, client routes are not operable.
DNS Suffix
A DNS suffix to be appended to incomplete DNS search strings. This setting
is optional.
is optional.
Primary DNS Server
The IP address of the primary DNS server that is assigned to the VPN tunnel
clients. This setting is optional.
clients. This setting is optional.
Note:
If you do not assign a DNS server, the DNS settings remain
unchanged in the SSL VPN client after a VPN tunnel has been established.