Netgear FVS318N 사용자 설명서

In the Internet (IP) Address section of the screen (see the following figure), configure the IP 
address settings as explained in the following table. Click the Current IP Address link to 
see the currently assigned IP address.

Other (PPPoE)

For login 

and password 
information, see 

 and 

.

If you have installed login software, then your connection type is PPPoE. Select this 
radio button, and enter the following settings:

Account Name

The valid account name for the PPPoE connection.

Domain Name

The name of your ISP’s domain or your domain name if your ISP 
has assigned one. You can leave this field blank. 

Idle Timeout

Select the Keep Connected radio button to keep the connection 
always on. To log out after the connection is idle for a period, select 
the Idle Timeout radio button and, in the Idle Timeout field, enter the 
number of minutes to wait before disconnecting. This is useful if your 
ISP charges you based on the period that you have logged in. 

Connection 
Reset

Select the Connection Reset check box to specify a time when the 
PPPoE WAN connection is reset, that is, the connection is 
disconnected momentarily and then reestablished. Then specify the 
disconnect time and delay.

Disconnect 
Time

Specify the hour and minutes when the connection 
should be disconnected. 

Delay

Specify the period in seconds after which the 
connection should be reestablished.