Netgear FVS318N 사용자 설명서

Click Apply to save your settings.

If you select the default NTP servers or if you enter a custom server 

FQDN, the wireless VPN firewall determines the IP address of the 
NTP server by performing a DNS lookup. Before the wireless VPN 
firewall can perform this lookup, you need to configure a DNS server 
address on the Broadband ISP Settings screen (see 

on page 31.)

NTP Servers (default or 
custom)

Select one of the following radio buttons to specify the NTP servers:

•  Use Default NTP Servers. The wireless VPN firewall regularly updates its 

RTC by contacting a default NETGEAR NTP server on the Internet.

• Use Custom NTP Servers. The wireless VPN firewall regularly updates its 

RTC by contacting one of two custom NTP servers (primary and backup), 
both of which you need to specify in the fields that become available with this 
selection.

If you select the Use Custom NTP Servers option but leave either the 

Server 1 or Server 2 field blank, both fields are set to the default NETGEAR 
NTP servers.

A list of public NTP servers is available at 

NTP Servers (custom)

Server 1 Name / IP Address

Enter the IP address or host name of the primary 
NTP server.

Server 2 Name / IP Address

Enter the IP address or host name of the backup 
NTP server.