Netgear FVS318N 사용자 설명서
Monitor System Access and Performance
368
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 220.
The type of connection determines the information that is displayed on the Connection
Status screen. The screen can display the information that is described in the following
table:
Status screen. The screen can display the information that is described in the following
table:
Click Disconnect to disconnect the connection; click Connect to establish the
connection.
connection.
Table 90. Connection Status screen information for an IPv4 connection
Item
Description
Connection Time
The period that the wireless VPN firewall has been connected through the WAN port.
Connection Type
The connection type can be either DHCP or Static IP.
Connection Status
The connection status can be either Connected or Disconnected.
IP Address
The addresses that were automatically detected or that you configured on the
Broadband ISP Settings (IPv4) screen.
Broadband ISP Settings (IPv4) screen.
Note:
For more information, see
Subnet Mask
Gateway
DNS Server
DHCP Server
DHCP only. The DHCP server that was automatically detected. This field displays
only if your ISP does not require a login and the IP address is acquired dynamically
from your ISP. You have configured these ISP settings on the Broadband ISP
Settings screen.
only if your ISP does not require a login and the IP address is acquired dynamically
from your ISP. You have configured these ISP settings on the Broadband ISP
Settings screen.
Note:
For more information, see
Lease Obtained
DHCP only. The time when the DHCP lease was obtained.
Lease Duration
DHCP only. The period that the DHCP lease remains in effect.