Netgear FVS318N 사용자 설명서

As an optional step: If you have selected the Stateless Address Auto Configuration radio 
button, you can select the Prefix Delegation check box: 

Prefix delegation check box is selected. A prefix is assigned by the ISP’s stateful 
DHCPv6 server through prefix delegation, for example, 2001:db8:: /64. The wireless 
VPN firewall’s own stateless DHCPv6 server can assign this prefix to its IPv6 LAN 
clients. For more information about prefix delegation, see 

Prefix delegation check box is cleared. Prefix delegation is disabled. This is the 
default setting.

Click Apply to save your changes.

To verify the connection, click the Status option arrow in the upper right of the screen to 
display the Connection Status pop-up screen. (The following figure shows a dynamic IP 
address configuration.)

The Connection Status screen should show a valid IP address and gateway, and you are 
connected to the Internet. If the configuration was not successful, see 

For more information about the Connection Status screen, see 

on page 367.

Configure a Static IPv6 Internet Connection

To configure a static IPv6 or PPPoE IPv6 Internet connection, you need to enter the IPv6 
address information that you should have received from your ISP. 



Select Network Configuration > WAN Settings > Broadband ISP Settings.

In the upper right of the screen, select the IPv6 radio button. The ISP Broadband Settings 
screen displays the IPv6 settings: