Netgear FVS318N 사용자 설명서

다운로드
페이지 425
IPv4 and IPv6 Internet and Broadband Settings
45
 ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
5. 
Click Apply to save your changes.
6. 
To verify the connection, click the Status option arrow in the upper right of the screen to 
display the Connection Status pop-up screen (see 
 on page 43, which shows a 
static IP address configuration; the screen for PPPoE is very similar.) 
The Connection Status screen should show a valid IP address and gateway, and you are 
connected to the Internet. If the configuration was not successful, se
Note:  
For more information about the Connection Status screen, see 
Note:  
If your ISP requires MAC authentication and another MAC address 
has been previously registered with your ISP, then you need to enter 
that address on the Broadband Advanced Options screen for the 
corresponding WAN interface (see 
DHCPv6 Option
From the DHCPv6 Option drop-down list, select one of the following DHCPv6 
server options, as directed by your ISP:
• Disable-DHCPv6. DHCPv6 is disabled. You need to specify the DNS servers in 
the Primary DNS Server and Secondary DNS Server fields in order to receive 
an IP address from the ISP.
•  DHCPv6 StatelessMode. The wireless VPN firewall generates its own IP 
address by using a combination of locally available information and router 
advertisements, but receives DNS server information from the ISP’s DHCPv6 
server. Router advertisements include a prefix that identifies the subnet that is 
associated with the WAN port. The IP address is formed by combining this 
prefix and the MAC address of the WAN port. The IP address is a dynamic 
address.
•  DHCPv6 StatefulMode. The wireless VPN firewall obtains an interface 
address, configuration information such as DNS server information, and other 
parameters from the ISP’s DHCPv6 server. The IP address is a dynamic 
address.
• DHCPv6 Prefix Delegation. The wireless VPN firewall obtains a prefix from the 
ISP’s DHCPv6 server through prefix delegation, for example, 2001:db8:: /64. 
The wireless VPN firewall’s own stateless DHCPv6 server can assign this prefix 
to its IPv6 LAN clients. For more information about prefix delegation, see 
Primary DNS Server
If you have selected the Disable-DHCPv6 from the DHCPv6 Options drop-down 
list, the IPv6 IP address of the ISP’s primary DNS server.
Secondary DNS Server If you have selected the Disable-DHCPv6 from the DHCPv6 Options drop-down 
list, the IPv6 IP address of the ISP’s secondary DNS server.
Table 8.  Broadband ISP Settings screen settings for a PPPoE IPv6 connection (continued)
Setting
Description