Olympus digital voice recorder 사용자 설명서

다운로드
페이지 56
50
5
EN
Troubleshooting
 Troubleshooting 
 Symptom 
 Probable  cause   
 Action 
 Nothing  appears  on 
the display 
 The battery power is low. 
 Charge the battery ( 
☞  P.12). 
 The recorder is turned off. 
 Turn the power on ( 
☞  P.14). 
 The recorder is currently in Power Save mode. 
 Press any button. 
 Unable to use any 
buttons 
 The recorder is in HOLD mode. 
 Release the recorder from HOLD ( 
☞   P.14). 
 Unable to record  
 The card does not have enough memory. 
 Erase unnecessary files or insert another card 
☞  P.15, P.25). 
 The card is unformatted. 
 Format the card ( 
☞  P.41). 
 The maximum number of files has been 
reached. 
 Change to any other folder ( 
☞  P.28). 
 The file is locked. 
 Unlock the file ( 
☞  P.35). 
 The SD card is locked. 
 Unlock the SD card. 
 No playback tone 
heard 
 The earphone is connected. 
 Unplug the earphones to use the internal 
speaker. 
 The volume level is set to [ 00 ]. 
 Adjust the volume level ( 
☞  P.23). 
 Unable to erase 
 The file is locked.  
 Unlock the file ( 
☞  P.35). 
 The SD card is locked. 
 Unlock the SD card. 
 Noise heard during 
playback 
 The recorder was shaken during recording. 
 ——— 
 The recorder was placed near a cell phone or 
fluorescent lamp while recording or during 
playback. 
 Avoid to use the recorder near cell phones or 
fluorescent lamps. 
 Recording level too 
low 
 The microphone sensitivity is too low. 
 Set the microphone sensitivity to the 
conference mode and try again ( 
☞  P.35).