MiTAC 8050D 사용자 설명서

3

The MiTAC 8050D  model is designed for Intel Banias processor with 400MHz FSB with Micro-FCPGA package. 
It can support Banias 1.5G ~ 1.9GHz/Dothan 2.0GHz and above. 

This system is based on PCI architecture and is fully compatible with IBM PC/AT specification, which has 
standard hardware peripheral interface. The power management complies with Advanced Configuration and 
Power Interface (ACPI) 2.0. It also provides easy configuration through CMOS setup, which is built in system 
BIOS software and can be pop-up by pressing F2 key at system start up or warm reset. System also provides icon
LEDs to display system status, such as AC Power indicator, Battery Power indicator, Battery status indicator, 
HDD,CD-ROM, NUM LOCK, CAP LOCK, SCROLL LOCK, RF on/off Card Reader indicator. It also equipped 
with LAN, 56K Fax MODEM, 3 USB port, S-Video and audio line in/out , external microphone function.

The memory subsystem supports two expansion DDR SDRAM slot with unbuffered PC1600/PC2100 DDR-
SDRAM. 

The Montara-GME GMCH Host Memory Controller integrates a high performance host interface for Intel Banias
processor, a high performance 2D/3D Graphic Engine, a high performance memory controller, Digital Video port 
(DVOB & DVOC)  interface, and Intel Hub interface Technology connecting with Intel 82801DBM ICH4-M. 

The Intel ICH4-M integrates three Universal Serial Bus 2.0 Host Controllers Interface (UHCI), the Audio 
Controller with AC97 interface, the Ethernet includes a 32-bit PCI controller, the IDE Master/Slave controllers, 
and Intel Hub interface technology. 

MiTac Secret

Confidential Document