Motorola MT2090 사용자 설명서

Radio Communications 4 - 21

When operating with the cradle, two modes of pairing are supported:

Locked Pairing Mode - When a cradle is paired (connected) to the device (or to seven devices in 
Multipoint-to-Point mode), any attempt to connect a different device, by either scanning the PAIR bar code on 
the cradle or by inserting it into the cradle with the pairing on contacts feature enabled (

), is 

rejected. The currently connected device(s) maintain connection. In this mode, you must set a 

In Locked Pairing Mode/Multipoint-to-Point mode, lock override is required for an eighth device to connect.

Unlocked Pairing Mode - Pair (connect) a new device to a cradle at any time by either scanning the PAIR bar 
code on the cradle or by inserting it into the cradle with the pairing on contacts feature enabled. This unpairs 
the previous device from the cradle.

In Unlocked Pairing Mode/Multipoint-to-Point mode, an eighth device connection succeeds by disconnecting 
a device that is already connected.

To set the cradle pairing mode, scan the appropriate bar code below.

Lock Override overrides a locked device base pairing and connects a new device. In Multipoint-to-Point mode, 
this unpairs any disconnected (out of range) device first, in order to connect the new device.

To use Lock Override, scan the bar code below, followed by the pairing bar code on the cradle.