Acer 5740D 사용자 설명서
Chapter 5
103
Clearing Password Check and BIOS Recovery
This section provides the standard operating procedures for clearing the password and BIOS recovery for the
system. There is one Hardware Open Gap on the main board for clearing the password check and one Hotkey
for enabling BIOS Recovery.
system. There is one Hardware Open Gap on the main board for clearing the password check and one Hotkey
for enabling BIOS Recovery.
Clearing Password Check
Hardware Open Gap Description
Hardware Gap Position on the Main Board
Gap name in Aspire 5740/5740D/5340 Series is G77.
Steps for Clearing BIOS Password Check
If the user sets the BIOS Password (Supervisor Password and/or User Password) for a security reason, the
BIOS will ask for the password during system POST or when the system enters into the BIOS Setup menu. If
it is necessary to bypass the password check, the user needs to short the hardware gap to clear the password
by following these steps:
BIOS will ask for the password during system POST or when the system enters into the BIOS Setup menu. If
it is necessary to bypass the password check, the user needs to short the hardware gap to clear the password
by following these steps:
•
Power off the system, and remove the HDD, AC adapter and battery from the computer.
•
Open the back cover of the computer and look for the hardware gap on the main board as shown
in the picture(s) above.
in the picture(s) above.
•
Use an electric conductivity tool to short the two points of the hardware gap.
•
Plug in the AC adapter while retaining the short condition on the hardware gap. Press the power
button to turn on the computer until the BIOS POST routine is finished. Finally, remove the tool
from the hardware gap.
button to turn on the computer until the BIOS POST routine is finished. Finally, remove the tool
from the hardware gap.
•
Restart the system. Press the F2 key to enter BIOS Setup menu.
Hardware
Default Setting
Operation Description
Gap
Open (Normal)
Short (Clearing Password Check)