Acer 3000 사용자 설명서
44
English
Re-install bundled software without CD
Acer eRecovery stores pre-loaded software internally for easy driver
and application re-installation.
and application re-installation.
1
Boot to Windows
®
XP.
2
Press <Alt>+<F10> to open the Acer eRecovery utility.
3
Enter the password to proceed. The default password is six zeros.
4
In the Acer eRecovery window, select Recovery actions and
click Next.
click Next.
5
In the Recovery settings window, select Reinstall applications/
drivers and click Next.
drivers and click Next.
6
Select the desired driver/application and follow the instructions on
screen to re-install.
screen to re-install.
At first launch, Acer eRecovery prepares all the needed software and
may take few seconds to bring up the software content window.
may take few seconds to bring up the software content window.
Change password
Acer eRecovery and Acer disc-to-disc recovery are protected by a
password that can be changed by the user. Follow the steps below to
change the password in Acer eRecovery.
password that can be changed by the user. Follow the steps below to
change the password in Acer eRecovery.
1
Boot to Windows
®
XP.
2
Press <Alt>+<F10> to open the Acer eRecovery utility.
3
Enter the password to proceed. The default password is six zeros.
4
In the Acer eRecovery window, select Recovery settings and
click Next.
click Next.
5
In the Recovery settings window, select Password: Change Acer
eRecovery password and click Next.
eRecovery password and click Next.
6
Follow the instructions on screen to complete the process.
Note: If the system crashes, and will not boot to Windows, you can
run Acer disc-to-disc recovery to restore the factory default image
under DOS mode.
run Acer disc-to-disc recovery to restore the factory default image
under DOS mode.